Configuration Urmet Callme App; Logout; Exit - Urmet 1083/58 Manual De Configuración

5. coNfigUrATioN Urmet
callMe APP
To be able to configure the Urmet CallMe App select
the "Settings" button from the Home page.
Appear:
Create or Set Account
Configure device
Settings Menu
From here, select "Configure app".
Receive incoming calls only when
the mobile device is connected
to a Wi-Fi network
Disable
Receive incoming calls
Enable
App Configuration Menu
Optionally, the Urmet CallMe application can help you
to:
— Limit incoming calls to periods in which the device is
connected to a Wi-Fi network, which will save your
SIM card data allowance.
DS1083-106
Configure app

Logout

Exit

Enable
Disable
— Disable incoming calls without having to log out;
in this case, calls will no longer be received until
the switch is set back to "Enable".
To show the user that incoming calls have been
disabled in the App setup page, the status icon
in the home page will be on (yellow/orange light)
and flashing.
6. LogoUT
Press the "Logout" button on the Settings menu to
disconnect the account connected to the Urmet CallMe
App.
Create or Set Account
Settings Menu
7. EXiT (available only for Android)
Press the "Exit" button on the settings menu, to exit the
Urmet CallMe App.
Warning. Exiting the application will no longer be can
receive calls.
Other smartphones connected with the same
account to the call sender device will continue
to receive incoming calls.
If you did not log out before closing the application, the
next time you start the app, it will log onto the same
account used before closing.
Configure device
Configure app
Logout
Exit
1