How To Activate A Yokis Control - Urmet note 2 mikra2 IP45 Guía Rápida De Uso

Cycle other cameras present in the system
Record a video clip of the visitor
Change the image format from 4:3 to 16:9 or vice versa
Adjust the video brightness, contrast and saturation
Adjust the speaker sound intensity (and if you wish enable/disable the feedback click when the
display is touched)
Mute/reactivate your microphone (option available after replying only)
or
End the conversation
Press the button during a call to end it. The video door phone will switch off.
1.4

HOW TO ACTIVATE A YOKIS CONTROL

On the Home Page, press the button
From here you can select the required control or controls.
To schedule a command over the week, on the Home Automation page of the video door phone, press
, then .
12
to access Yokis Home Automation:
DS1723-002