Unpacking Your Fan; Parts Inventory - Craftmade CCU52 Guia De Instalacion

1. Unpacking Your Fan.

Carefully open the packaging. Remove items
from Styrofoam inserts. Remove motor housing
and place on carpet or Styrofoam to avoid
damage to finish. Do not discard fan carton or
Styrofoam inserts should this fan need to be
returned for repairs.
Check against parts inventory that all parts have
been included.

2. Parts Inventory.

c. downrod and hanging ball. 1 piece
g. spring washer (pre-attached to light kit fitter).
h. hex nut (pre-attached to light kit fitter).
i. finial plate (pre-attached to light kit fitter).
j. finial (pre-attached to light kit fitter).
*Blade drawings in this manual are representative only
IMPORTANT REMINDER: You must
use the parts provided with this fan for
proper installation and safety.
a. canopy. 1 piece
b. hanging bracket. 1 piece
d. motor housing. 1 piece
e. light kit fitter. 1 piece
f. blade arm. 5 pieces
1 piece
1 piece
1 piece
1 piece
k. blade*. 5 pieces
l. glass shade. 1 piece
m. hardware packs
a
d
f
k
l
m
2 x 13 watt medium base compact
fluorescent bulbs (included)
page 2
b
c
e
g
h
i
j
required bulbs: