Novik Neo EVOD STREETSOUND V Manual De Instrucciones página 9

WIRING
1. RCA Connector
This kind of connector is used for audio input and output signal line, such as mixers, lap-
tops, CD players and tape. Each connector transmits a mono signal, but is usually used
in pairs to transmit stereo signals.
2. XLR Connector
Standard microphone connectors. They are sturdy and easy to install.
BALANCED signal transmission.
3. Mono Plug Connector 6.3mm (1/4¨)
Tip (tip) = Signal
Sleeve (sleeve) = ground / shield
SLEEVE PIN