Height Adjustment - FujiFilm FP-Z8000 Manual Básico

Installation

Height Adjustment

Height Adjustment
The height of the projector can be adjusted (by about 2.5 cm) using the adjustable feet. If
desired, the feet can be removed and attached to the top of the projector. The projector
ships with the feet attached to the bottom.
Feet attached to bottom
4
CAUTION:
SWAPPING THE
ADJUSTABLE
FEET
To prevent the entry of dust, the projector comes with caps inserted in the
attachment points for the adjustable feet on top of the projector. After swap-
ping the feet from the top to the bottom or vice versa, be sure to insert the
caps in the unused attachment points to prevent dust entering the projector.
Adjustable
feet
EN-14
Feet attached to top