On/Standby; Connecting The Power Cable - FujiFilm FP-Z8000 Manual Básico

Using the Remote Control

On/Standby

Connecting the Power Cable

Connecting the Power Cable
Attach the supplied cable lock.
1
b
TIP:
THE CABLE
LOCK
2 Connect the supplied power cable to the pro-
jector and plug it into a power outlet.
The cable is secure when you hear the tabs
on the cable lock click into place.
4
CAUTION
To prevent the power cable being disconnected, secure it to the projector us-
ing the supplied cable lock.
Use the supplied power cable only. In addition, note that supplied power ca-
ble is for use exclusively with FP-Z8000 projectors. Do not use the power cable
with any other device or the projector with any other power cable.
EN-20