• Push the Fan Blade
onto the Motor Shaft,
lining up the blade with
the D-shape on the
Motor Shaft's end.
Tighten the Blade Knob
by turning it COUNTER-
CLOCKWISE (Fig. 7).
• Properly align the Front
Grille and hook the top
Fig. 7
Grille clip (I) onto the
Rear Grille (Fig. 8).
• Raise the built in clips
around the Front Grille.
Fasten the clips onto the
Rear Grille (Fig. 9)
Fig. 8
I
Fig. 9