Hahnel MODUS 600RT Manual De Instrucciones página 33

Modus 600RT
1. Set master Unit
• Press the <
button and set the flash
<
mode to
See Page 26
2. Set the firing group of
the slave units
• Operate and set the
slave units one by one
• Press Function Button
< > to assign
Gr
the speedlight to group
<A>, <B> or <C>. See
3. Set the flash modes
• Set the flash mode of
each firing group by
the operation of the
master speedlight. See
Page 27
4. Set the flash output
and flash exposure
compensation amount
• While a firing group
is selected, press
Function Button 3 <
>
• Turn the Select Dial to
set the flash function
corresponding to
flash mode, and press
<SET> Button to
confirm
• When using the <M>
mode, set the flash
output power
• When using the
<i-TTL> mode, set
the flash exposure
compensation amount
as required
• Repeat step 4 to set
the flash function of all
groups
• Press Function Button
4 to return to the
shooting-ready state
>
MODE
>
.
MASTER
33