Multiple Master Unit; Manual Flash - Hahnel MODUS 600RT Manual De Instrucciones

Multiple Master Unit

You can use two or more cameras with master flash
units on each to change camera shooting while keeping
the same lighting setup (slave units) in wirelesss flash
photography.
M: Wireless Flash Shooting with

Manual Flash

This describes wireless using manual flash. You can shoot
with a different flash output setting for each slave unit
(firing group). Set all parameters on the master unit.
RPT: Wireless shooting with Multi
repeating flash stroboscopic
Modus 600RT
1. Setting the manual
flash mode to <M>
• Press Function Button
4 < >
Gr
the group
• Then press Function
Button 3 <
MODE
set the <M> mode
2. Setting manual flash
output power
• Press Function Button
2 < >. Turn the
Select Dial to adjust the
flash output of the group
• Press <SET> button to
confirm
3. Setting individual group
flash output power
4. Each group M (Master
speedlight) / A / B / C
can be set individually
to different power level
• Set any group to <--->
to turn of the power of
this group
1. Setting <RPT>
stroboscopic flash
• On the Master
Speedlight press
<MODE> button until
<RPT> is displayed
• Turn the Select Dial to
adjust the flash output
power. Press <SET>
button to confirm
to choose
> to
31