Master Unit Setting; Slave Unit Setting; Master Unit Flash On/Off; Setting The Optical Communication Channel - Hahnel MODUS 600RT Manual De Instrucciones

Master Unit Setting

Slave Unit Setting

Master Unit Flash ON/OFF

You can switch ON or OFF the "Master" unit flash that is
controlling the wireless "Slave" units. When Master flash is
ON, it will flash as group A.
For more detailed information on this feature see
description under 2.4GHz Radio control (Page 26 )
• Even if the master unit flash firing is disabled, it still fires a
preflash to transmit wireless signals

Setting the optical Communication Channel

The Modus 600RT has four optical communication
channels. The master and the speedlights must be set to
the same channel.
Master
• Press function button 3 <
select dial to set the required channel
• Press <SET> button to lock selection
Slave
• Press function button 4 <
select dial to set the required channel
• The channel must be set the same as the master
speedlight
Modus 600RT
Press < > button
so that <
> are displayed
MASTER
on the LCD panel.
Press < > button
so that <
> are displayed
SLAVE
on the LCD panel.
> and use the
CH
CH
> and use the
> and <
> and <
35