Features; Assembly - Craftsman 315.115760 Manuel Del Operador

PRODUCT SPECIFICATIONS
Chuck ........................................................... 3/8 in. Keyless
Motor ............................................................... 19.2 Volt DC
Switch .......................................................... Variable Speed
KNOW YOUR RIGHT ANGLE DRILL-DRIVER
See Figure 1, page i.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual
as well as a knowledge of the project you are attempt-
ing. Before use of this product, familiarize yourself with all
operating features and safety rules.
BIT STORAGE
Bits provided with the drill-driver can be placed in the
storage area, located on the base of the drill.
DIRECTION OF ROTATION SELECTOR
(FORWARD/REVERSE/CENTER LOCK)
Your drill has a direction of rotation (forward/reverse/
center lock) selector located above the switch trigger for
changing the direction of bit rotation. Setting the direction
of rotation selector in the OFF (center lock) position helps
reduce the possibility of accidental starting when not in
use.
UNPACKING
This product has been shipped completely assembled.
 Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if it is not
completely assembled or if any parts appear to be
missing or damaged. Use of a product that is not
properly and completely assembled could result in
serious personal injury.
 Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-800-932-3188 for assistance.
PACKING LIST
3/8 in. Right Angle Drill-Driver
Double-ended Bits
Operator's Manual

FEATURES

No Load Speed ............................................... 0-1,050/min.
Torque ....................................................................150 in.lb.
KEYLESS CHUCK
The keyless chuck allows you to hand-tighten or release
the drill bit in the chuck jaws.
LED WORKLIGHT
The LED worklight, located below the chuck, illuminates
when the switch trigger is depressed. This provides extra
light for increased visibility.
RIGHT ANGLE DESIGN
The drill-driver's right angle head design feature allows
you to get into tight work areas for drilling and driving.
VARIABLE SPEED
The variable speed switch trigger delivers higher speed
with increased trigger pressure and lower speed with
decreased trigger pressure.

ASSEMBLY

WARNING:
not operate this product until the parts are replaced.
Use of this product with damaged or missing parts
could result in serious personal injury.
WARNING:
or create accessories not recommended for use
with this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING:
could cause serious personal injury, always remove
the battery pack from the product when assembling
parts.
6 - English
If any parts are damaged or missing do
Do not attempt to modify this tool
To prevent accidental starting that