KTM Power Parts 93012919033 Guia De Inicio Rapido página 5

Scope of supply
1x tank backpack
1x EVO tank ring
1x EVO upper ring
4x cap head screw M5x25
4x cap head screw M5x45
4x oval head screw M5x10
4x spacer
1x drilling template
1x rain cover
1x carrying strap
1x drill bit
1x mounting tool
Assembly
- Remove screws .
- Mount spacers (included).
- Position tank ring (included).
125 - 390 Duke
- Mount screws (included) and tighten to 5 Nm (Loctite 243).
790 Duke
- Mount screws (included) and tighten to 5 Nm (Loctite 243).
- Open the inside fabric cover of tank backpack
remove completely from the reinforcement plate.
- Position drilling template
- Drill mounting holes with the drill bit
NOTE:
Drill through the openings of the drilling template and place a wood-
en block on the opposite side.
(for 125 - 390 Duke)
(for 790 Duke)
(included) and
(included) on the outside.
(included).
5