Battery Charging
If the battery level becomes almost empty, the units will display the below :
Model
Baby Unit
LED Indicator version
Power indicator flashes
Red light.
No Alert sound
LCD Display version
flashing
No Alert sound and empty
battery
In this case, user needs to recharge the supplied rechargeable batteries or change for
new alkaline AAA batteries.
Charging the batteries
The rechargeable batteries to the Baby unit and Parents unit must not be taken out of
the units for charging.
1. Use only the AC adaptors which are included in the package, plug into any nearby
standard household electrical outlet.
2. Once connect them with the units, charging automatically begins.
3. The charging time for completely charging empty battery takes 8 hours when the
unit is turned off.
28
Parent Unit
Emits a alert tone in every
3 seconds.
Emits a alert tone in every
3 seconds
Charging and Fully charged Indication:
LED Indicator version
In charging
Flashing red light fast
(Unit is turned
on)
In charging
Flashing red light slow
(Unit is turned
off)
Fully charged
Green light / Flashing
(Unit is turned
green light
on)
Fully charged
Red light
(Unit is turned
off)
Note:
• User can also install 3 alkaline AAA batteries instead of the supplied re-chargeable
batteries.
• Or directly operated by the supplied adaptors.
Testing Before First Time Usage
A. Test the Baby unit transmission and the Parents unit reception.
1. Place Baby unit and Parents unit in room where you intend to use it.
2. Set both Baby unit and Parents unit to the corresponding code by pressing the
LINK key at the bottom of the units for different ID code to ensure privacy.
There are more than 65000 ID codes user selection.
LCD version
The battery icon loops.
The battery icon loops.
or
The battery icon stops looping.
The battery icon stops looping.
29