Hama BC-400D Manual Del Usuario página 18

Baby Unit
flashing
For Blue Angel version, when only turn on the Parents unit, out of range alert sound
should be heard within 30 second.
Note: Under out of range alert mode, the TALK, PAGE and music play key is not available
for use.
I. Key Lock / Unlock
1. Turn the right-hand key lock side switch to LOCK position
of unit to lock key. The TALK key, PAGE key and MUSIC
key are not available for use.
2. Turn the same switch to UNLOCK position to unlock all the keys.
J. Belt Clip
The Baby unit and Parents unit can both be carried around using the belt clip provided
on the rear of each unit.
How to operate 2 way communication between Parents unit and Baby unit
The Baby Phone yields high privacy and almost zero-interference to end users. There
are more than 65000 ID code for user selection with the LINK key
positioned at the bottom of the units.
NOTE:
Only scan the corresponding code for both units, they are able to connect to one
another.
Operating and Setup
A. Scan the Corresponding Code
1. Turn on both units. The Baby unit will emit a random ID code to Parents unit
automatically without pressing any key.
2. Once scanned the corresponding code, the units are ready for use. The code is
recorded even thought you turn off the units or recharge the batteries. Or else the
unit is not for use.
34
flashing
red light
B. LINK key
LINK key is located at the bottom of the Parents unit and Baby unit. It is used for
eliminating the corresponding code recorded in the unit and reset a new
corresponding code for the Parents unit and Baby unit. The Parents unit / Baby unit
can connect with another Baby unit / Parents unit with the LINK key to scan a new
corresponding code for them.
1. Ensure both units are turned ON. Press the LINK key of the units with a spiky and
thin object (such as toothpick).
2. Both units begin to scan corresponding code.
LCD Version
Scanning the correspon- Parent unit:
flashing
ding code automatically
Baby unit:
flashing
Scanned the correspondi- Baby unit and parent unit:
ng code successfully
normal status
or
constantly changing
display-readouts
with a "Di" sound
LED Indicator version
Parent unit:
flashing
orange light
Baby unit:
flashing
orange light
Baby unit
red light
Parent unit
green light
with a "Di" sound
35