Hama BC-400D Manual Del Usuario página 16

3. Then:
- The LCD displays standby status. (LCD version)
- The power indicator lights and the power is on. (LED Indicator version)
NOTE:
For the first time usage, turn on both units, they can automatically scan the
corresponding code at once without press any key. If reset the corresponding code for
both units, user has to press the LINK key.
B. Baby unit emission:
1. Place Baby unit in room where you intend to use it.
2. Push the SENSITIVITY switch to a desired position to turn on the Baby unit
transmission.
3. As soon as the Baby unit transmits a signal, then:
LCD Version
Constantly changing display-
readouts
4. The transmitter is standby status when no signal is transmitted.
LCD Version
C. Parents unit reception
1. Place Parents unit in room where you intend to use it.
2. Slide the VOLUME switch to a desired position and the unit is ready for reception.
3. If the unit receives a signal,
30
LED Indicator version
green light
LED Indicator version
flashing green light
LCD Version
Constantly changing display-
readouts
4. The receiver is standby status when no signal is received.
LCD Version
When you experience interference (buzzing or static, etc.), reset both units to another
corresponding code. ( details please refer to P.11 – scan the
corresponding code for the units )
IMPORTANT! Test sound reception before use and whenever location of Baby unit is
changed. (Refer to Testing Before First Time Usage)
Note:
• Position the Baby unit at least 1 meter away from the baby so that the microphone can
pick up the child's sound.
• Unwrap and fully extend power cord for best transmission if adaptor is used.
Plug the adaptor into the nearest standard household electrical outlet.
Operations Procedures
A. Power On / Off
1. Connect the Parents unit with the AC adaptor. Plug it into the nearby standard
electrical outlet or insert 3 AAA alkaline batteries.
2. Turn on at the right side upward of the unit, a click sound to
be heard indicates the unit is turned on.
3. Turn downward, a click sound indicates the unit is off.
LED Indicator version
green light
green light
LED Indicator version
flashing green light
31