Honeywell TURBO FORCE HT-900 Serie Manual Del Usuario

Owner's Manual
IMPORTANT SAFETY
INSTRUCTIONS
READ AND SAVE THESE SAFETY
INSTRUCTIONS BEFORE USING THIS FAN
When using electrical appliances, basic
precautions should always be followed to
reduce the risk of fire, electric shock, and
injury to persons, including the following:
FOR US MODELS ONLY - This product employs
overload protection (fuse). A blown fuse
indicates an overload or short-circuit situation.
If the fuse blows, unplug the product from
the outlet. Replace the fuse as per the user
servicing instructions (follow product marking
for proper fuse rating) and check the product. If
the replacement fuse blows, a short-circuit may
be present and the product should be discarded
or returned to an authorized service facility for
examination and/or repair.
1.
Use this fan only as described in this manual.
Other use not recommended, may cause fire,
electric shock or injury to persons.
2. This product is intended for household use ONLY
and not for commercial, industrial or outdoor use.
3.
To protect against electric shock, do not place
fan in window, immerse unit, plug or cord in
water or spray with liquids.
4.
This appliance has a polarized plug (one blade
is wider than the other). To reduce the risk of
shock, this plug is intended to fit only one way in
a polarized outlet. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Do Not attempt to
defeat this safety feature.
5.
Close supervision is necessary when any
appliance is used by or near children.
Honeywell is a trademark of Honeywell International Inc., used under license by Helen of Troy Limited.
Honeywell International Inc., makes no representation or warranties with respect to this product.
Turbo Force is a registered trademark owned by Helen of Troy Limited.
TURBO FORCE
HIGH VELOCITY
AIR CIRCULATORS
HT-900 Series, HT-908 Series
and HF-910 Series
6. Turn the fan to the OFF position and unplug
the fan from the outlet when not in use, when
moving the fan from one location to another
and before cleaning.
7.
To disconnect the fan, first turn control to
the OFF position, grip the plug and pull it
from the wall outlet. Never pull by the cord.
8. Do not operate the fan in the presence
of explosive and/or flammable fumes.
9. Do not place the fan or any parts near an open
flame, cooking or other heating appliance.
10. Do not operate fan with an extension cord or
power strip.
11. Do not operate the fan with a damaged cord or
plug or if the product malfunctions, is dropped
or damaged in any manner (see warranty).
12. Avoid contact with moving fan parts.
13. The use of attachments not recommended
by the manufacturer may be hazardous.
14. Place the fan on a dry level surface.
15. Do not hang or mount fan on ceiling. HF-910,
HT-908 Series cannot be wall mounted.
16. Do not operate if the fan housing is removed
or damaged.
17. A loose fit between the AC outlet (receptacle)
and plug may cause overheating and a distortion
of the plug. Contact a qualified electrician to
replace loose or worn outlet.
18. Do not operate any fan with a damaged cord
or plug. Discard any damaged fan, or return the
fan to the retailer where the fan was purchased,
or request a return authorization to return to
Kaz USA, Inc. for examination and/or repair.
19. Do not run fan cord under carpeting. Do not
cover cord with throw rugs, runners, or similar
coverings. Do not route cord under furniture or
appliances. Arrange cord away from traffic areas
and where it will not be tripped over.
WARNING:
To Reduce The Risk
of Fire or Electric Shock, Do Not Use
This Fan With Any Solid State Speed
Control Device
®