Assembly Concrete Wheel Base - Extremis INUMBRINA 38 Manual Del Usuario

6. Insert the Inumbrina parasol in the anchor tube
and fasten it by turning the adjusting screw clockwise.
Always tighten the adjusting screw until the
Inumbrina can no longer revolve on its axle.

ASSEMBLY CONCRETE WHEEL BASE

1. Put the four concrete tiles on top of the frame with
wheels. Align the holes in the concrete tiles with the
holes in the metal plate of the cross-shaped base. The
side with the bevelled corners should be facing
downwards.
2. Position the stainless steel tube on top of the concrete
tiles. Make sure that the holes in the stainless steel
disk are perfectly aligned with the holes in the
concrete tiles. You can now attach the stainless steel
tube to the concrete tiles using the four supplied bolts.
Tighten them with a 17 mm openend wrench
english 5