Assembly Inumbrina Into Gargantua; Assembly Inumbrina Into Pantagruel - Extremis INUMBRINA 38 Manual Del Usuario

ASSEMBLY INUMBRINA INTO GARGANTUA

WHAT YOU NEED
1 persoon
no. 5 hex key
+/- 20 min.

ASSEMBLY INUMBRINA INTO PANTAGRUEL

WHAT YOU NEED
1 person
no. 5 hex key
+/- 20 min.
1. Remove the Lazy Susan.
2. Put the inumbrina38 insert in the
hole in the middle of the tabletop.
Make sure that the cylindrical
part is facing downwards and the
square plate is facing upwards.
Fasten the attaching part to the
central metal part connecting the
4 Gargantua legs, as shown in the
drawing.
3. Fasten the insert to the table,
putting the bolts through the
bottom of the table. Put the Lazy
Susan back into its original
position.
4. Put the inumbrina parasol in the
Pantagruel table and block it by
turning the adjusting screw
clockwise. The adjusting screw is
sufficiently tightened when the
inumbrina parasol can no longer
revolve on its axis.
Now reassemble your Gargantua
table. Insert the Inumbrina parasol
in the Gargantua anchor tube and
fasten it by turning the adjusting
screw clockwise. Always tighten the
adjusting screw until the Inumbrina
can no longer revolve on its axle.
english 7