What You Need; Assembly Concrete Base - Extremis INUMBRINA 38 Manual Del Usuario

ASSEMBLY INUMBRINA ON CONCRETE BASE

WHAT YOU NEED

1 person
no. 17 spanner
screwdriver
+/- 30 min.
2. Fix the plastic glides to the bottom of the concrete
tiles: put the supplied plugs into the holes and tighten
the glides with the supplied screws.
4. Position the stainless steel tube on top of the concrete
tiles. Make sure that the holes in the stainless steel
disk are perfectly aligned with the holes in the
concrete tiles.
4 assembly inumbrina on concrete (wheel) base
1. Position the first element of the cross-shaped base on
the floor where you wish to place the parasol. Then
slide the second element over first one ensuring that
the grooves correspond and fit perfectly.
3. Put the four concrete tiles on top of the cross-shaped
base. Align the holes in the concrete tiles with the
holes in the metal plate of the cross-shaped base. The
side with the bevelled corners should be facing
downwards.
5. You can now attach the stainless steel tube to the
concrete tiles using the four supplied bolts. Tighten
them with a 17 mm openend wrench.