Hardware Installation - Avermedia C285 Manual De Usuario

Tabla de contenido

Publicidad

4.2 Hardware Installation

Please follow the steps below to properly connect the Capture Box and your TV/ video game consoles.
 If you would like to install internal hard drive, install it before turning on the Capture Box.
 Make sure that the cables are firmly connected and that neither of the cables is loose. If any of the cables are
loose or disconnected, there may be a loss of signal or screen color problems.
Step 1
Check the Connection of Your Game Consoles and TV
Make sure all cables connecting the Capture Box to your game consoles and TV are well-connected.
Doing so will save you a lot of time from locating problems later. First, please check the connection of
your game consoles. Second, make sure that the connection to TV is good.
Step 2
Connect the Device to Your Wii U / Xbox 360 Using HDMI Cable
Connect one end of the HDMI cable to the HDMI IN port on the rear of the device and the other end to
the HDMI OUT port on your Xbox 360/ Wii U.
Connect the Device to Your PlayStation 3 / Wii Using Component AV Cable
Plug the green, blue, red connectors into the COMPONENT VIDEO IN port and white and red
connectors into the AUDIO IN port on the rear of the device. Then, plug the other end to your game
console.
English-14

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido