Connecting To The Network - Avermedia C285 Manual De Usuario

Tabla de contenido

Publicidad

Step 6

Connecting to the Network

To automatically obtain time and other information, you need to connect the Capture Box to an Ethernet
LAN. Make sure the LAN wire is well-connected before you continue to the next step. Meanwhile, a
router which supports DHCP IP network is recommended for you to pair up the Game Capture HD II
with your iPhone.
 It is recommended that you connect the Capture Box before running first time setup.
Step 7
Plug in USB Hard Drive/ HDD
Connect your portable USB hard drive or hard disk drive (HDD) to the USB port on the front of the
Capture Box. Please make sure you use an NTFS format USB hard drive or hard disk drive (HDD).
Under the condition that no hard drive is connected to the device, the power light will continue to flash.
Therefore, it is advised that you plug in USB hard drive or hard disk drive (HDD). Please see Chapter
4.3.2 for further details about installing an internal hard drive.
English-17

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido