AKG Acoustics K 306 AFC Modo De Empleo página 8

The Autotuning function will automatically tune the reception
frequency to the carrier frequency set on the transmitter. After
a few seconds, you should hear the signal in the headphones
clearly and free of interference.
If your first try fails, set the FREQ selector (9) on the transmit-
ter to a different position and press AUTOTUNING (5)
again.
FREQ (9) lets you select one of three different carrier fre-
quenices.
5. Set the VOLUME control (6) on the headphones to the
desired volume level.
Note: If the transmitter signal is disturbed, e.g., by reflections (multi-
path reception) or shadow effects, the headphones will auto-
matically mute. This function eliminates interference related
noise.
6.6 POWER ON/CHARGE LED Status
If LED is... Transmitter...
...lighting green: ...is connected to AC power and audio
source and receives signal. Head-
phones are not on the transmitter, char-
ging function is off.
...lighting orange: ...is connected to AC and audio
source and receives signal. Head-
phones are on the transmitter, charging
function is on.
...lighting red: ...has detected no signal for several
minutes, headphones are on the trans-
mitter, charging function is on.
...dark: ...has detected no signal for several
minutes, headphones are not on the
transmitter, charging function is off, OR
...is not connected to AC power.
7 Important Notes
1. Operating switches on or connecting the transmitter to your
audio source may cause clicks which at high volume settings
may affect your hearing. Therefore, be sure to set the
VOLUME control on the headphones to minimum before
switching between different sources (tuner, turntable, CD play-
er, etc.) or connecting the transmitter.
2. Listening over headphones at high volume levels, particularly
over extended periods of time, may damage your hearing.
3. Your K 306/K 406/K 506 AFC is a radio frequency device
that conforms to the strict European standards. For physical
reasons that have nothing to do with the quality of the product,
extremely strong interference sources may affect reception.
In order to maintain interference-free listening
pleasure, do not operate your K 306/K 406/K
506 AFC in the close vicinity of radio equipment,
cellular telephones, or directly above TV or com-
puter monitor picture tubes (see fig. 11). The supplied
connecting cable is long enough to allow the transmitter to be
placed at a safe distance from interference sources.
Interference caused by other users of the 864 MHz LPD
band are beyond AKG's control.
8
8 Specifications
System Performance
Modulation:
Carrier frequency band:
Selectable carrier frequencies: FREQ 1: 863.5 MHz
T 306 AFC/T 406 AFC/T 506 AFC Transmitter
Power supply:
Radiation angle:
Max. radiated power:
Max. range (free field*):
Weight (T 306/406 AFC): approx. 9.7 oz. (275 g)
(T 506 AFC):
K 306 AFC/K 406 AFC Headphones
Distortion:
Type:
Weight:
K 306 AFC Headphones
Power supply:
Battery life:
Frequency range:
Max. SPL:
K 406 AFC Headphones
Power supply:
Battery life:
Frequency range:
Max. SPL:
K 506 AFC Headphones
Power supply:
Battery life:
Frequency range:
Max. SPL:
Distortion:
Type:
Weight:
* under ideal transmission conditions
FM
864 MHz (LPD band)
FREQ 2: 864.0 MHz
FREQ 3: 864.5 MHz
9 VDC, 500 mA
approx. 360°
10 mW ERP (Equivalent Radiated
Power)
approx. 330 ft. (100 m)
approx. 11.1 oz. (315 g)
<1%
semi-open dynamic headphones
approx. 6.3 oz. (180 g)
3 VDC (2 x 1.2 V, 300 mAh AAA
size NiCd rechargeable batteries
supplied)
approx. 10 hours
(NiCd rechargeable batteries)
20 Hz to 22,000 Hz
~103 dB SPL
3 VDC (2 x 1.2 V, 600 mAh AAA
size NiMh rechargeable batteries
supplied)
approx. 20 hours
(NiMh rechargeable batteries)
20 Hz to 24,000 Hz
~105 dB SPL
3 VDC (2 x 1.2 V, 600 mAh AAA
size NiMh rechargeable batteries
supplied)
approx. 20 hours
(NiMh rechargeable batteries)
18 Hz to 24,000 Hz
~107 dB SPL
<1%
semi-open dynamic headphones
approx. 11.3 oz. (320 g)