HP Photosmart R717 Guía De Comienzo Rápido página 18

T2QSG.fm Page 16 Tuesday, January 11, 2005 5:50 PM
12. Transfer Images to a
Computer
1. Turn off the camera, then connect the camera to the
computer either through the USB cable provided or
through the optional HP Photosmart R-series dock (see
NOTE below).
2. If using the USB cable, turn on the camera. If using the
dock, press the Save/Print
3. Follow the on-screen instructions to have the software
transfer the images from the camera to the computer.
4. Disconnect the camera from the computer.
NOTE: If using the dock, make sure you use the dock insert
with the GREEN sticker on it. To connect the dock insert to
the dock, see the dock User's Manual.
16 HP Photosmart R717 Quick Start Guide
button on the dock.