Home Decorators Collection 91176 Guía De Uso Y Cuidado página 10

Assembly - Attaching the Light Kit Fitter Assembly
7
Attaching the light kit fitter assembly
CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light kit.
NOTE: Notice the location of the fan's slide switch. This is the
switch used to change the fan's directional rotation. For more
information on the operation of this switch, see Operatiing your
fan on page 11.
□
Remove the three screws (TT) on the switch cup over of the
light kit fitter assembly (D).
□
Connect the wires from the light kit fitter assembly (D) by
connecting the molded adaptor plugs together (blue to black,
white to white). Carefully tuck all wires and splices into the
switch cup.
□
Align the three holes in the switch cup cover of the light kit
fitter assembly (D) with the three holes in the switch cup
of the fan-motor assembly (B). Make sure the notch in the
switch cup cover of the light kit fitter assembly (D) clears
the slide switch in the switch cup of the fan-motor assembly
(D). Position the light kit fitter assembly (D) and re-install
the three screws (TT) that were removed in the first step to
secure the light kit fitter assembly (D).
B
D
8
Installing the glass bowl and bulbs
□
Remove the finial (UU) and the bottom cover (V V) from the
threaded nipple of the light fitter assembly (D).
□
With the power off, install the three LED bulbs (9.5W max) (H) by
screwing them into the light bulb sockets.
□
Position the glass bowl (G), and direct the fan pull chain through
the side hole of the bottom cover.
□
Direct the light pull chain through the hole in the bottom cover
(V V) and finial (UU) guide them over the threaded nipple, and
tighten the finial (UU) securely.
□
Attach the pull chain extensions (DD) provided to the light pull
chain and fan pull chain.
B
H
TT
10
WARNING: Allow the glass shades to cool completely before
removing.
CAUTION: Do not over tighten the hex nut, overtightening
the hex nut may cause the glass to break.
CAUTION: Make sure the power is off before attaching or
removing the glass shades.
V V
UU
D
G
DD