Coati 12600 Manual De Instrucciones página 16

2º manual 12600.qxd 30/11/00 17:46
Weekday Programming
1. Press the "DAILY" key. On your screen will appear the connecting time for Program 1.
2. The connecting time can be changed by pressing the "HOUR" and "MIN" keys until the
screen reads the desired time. Remember that the minutes can only be set at minimum
intervals of 10 minutes.
3. Once you have selected the correct connecting time, press "ENTER".
4. The screen will display a "1" and a preset temperature. To change the desired temperature,
use the triangular keys.
5. Having selected the correct temperature, press "ENTER".
6. The screen will now display program 2. Repeat steps 2 through 5 for each of the remaining
programs.
7. When finished, press the "REG/MAN" key to return to the standard operating mode.
Weekend Programming
For weekend programming, begin by pressing the "SAT/SUN" key, and then follow the same steps
used for weekday programming:
1. Press the "SAT/SUN" key. On your screen will appear the connecting time for Program 1.
2. The connecting time can be changed by pressing the "HOUR" and "MIN" keys until the
Página 30
30
screen reads the desired time. Remember that the minutes can only be set at minimum
intervals of 10 minutes.
3. Once you have selected the correct connecting time, press "ENTER".
4. The screen will display a "1" and a preset temperature. To change the desired temperature,
use the triangular keys.
5. Having selected the correct temperature, press "ENTER".
6. The screen will now display program 2. Repeat steps 2 through 5 for each of the remaining
programs
7. When finished, press the "REG/MAN" key to return to the standard operating mode.
Operating
The word HEAT will always appear on the screen.When it is blinking it means the furnace is on.
When the word HEAT is not blinking, it means the furnace is turned off.
6. Manually Operated
The thermostat can be regulated manually, independently of the program that is on at the time. To
adjust the temperature manually:
31