Technical Features - Coati 12600 Manual De Instrucciones

2º manual 12600.qxd 30/11/00 17:46
Press the triangular keys until the screen displays the desired temperature. The words TARGET
TEMP will appear blinking on the screen. After approximately 20 seconds, without pressing any key,
the words TARGET TEMP will stop blinking, and the actual room temperature will reappear on the
screen. The thermostat will establish and maintain the newly selected temperature until the next
program begins.
If you wish to cancel the manual function before the next program begins, press the "REG/MAN"
key.
In the front of the thermostat there is a manual switch for turning off the heater. By setting the switch
in the position designated "0", the heater will not turn on, even if the room temperature is below the
temperature programmed for that time. Setting the switch to position "1" will turn your heating
system back on in accordance with the preset programs.
Página 32
32

7. TECHNICAL FEATURES

Power Source 2 1'5V AA batteries (preferably alcaline)
Voltage and Cycles: VAC:250V~/Hz:50
Maximum Amperage: 5A
Temperature Range: 7° C to 38° C
Differential : 0,2° to 3° C
Four weekday programs and four weekend programs.
Switch to turn off thermostat.
33