Delivery Scope; Intended Use; Technical Data; Noise/Vibration Information - SPIT 321 Manual Original

10 | English
Symbol
Prohibited action
Drilling without impact
Chiselling
Switching On
On/Off switch lock-on
Low speed/impact rate
Impact energy per stroke according
E
to EPTA-Procedure 05/2009
P
Rated power input
1
Wood
Steel
Ø
Drilling diameter, max.
max.
Protection class
L
Sound power level
wA
K
Uncertainty

Delivery Scope

Rotary hammer, auxiliary handle and depth stop. Appli-
cation tools and other accessories shown or described
are not part of the standard delivery scope. A com-
plete overview of accessories can be found in our
accessories program.

Intended Use

The machine is intended for hammer drilling in
concrete, brick and stone, as well as for light chisel-
ling work. It is also suitable for drilling without impact
in wood, metal, ceramic and plastic. Machines with
electronic control and right/left rotation are also suitable
for screwdriving.
Meaning Symbol
Permitted action
Hammer Drilling
Screwdriving
Switching Off
Vario-Lock
High speed/impact rate
n
No-load speed
0
Core bit
Brickwork
Concrete
Weight according to
EPTA-Procedure 01/2003
L
Sound pressure level
pA
a
Vibration total value
h

Technical Data

The technical data of the machine are listed in the
Table on page 68.
The values given are valid for a nominal voltage [U] of
230 V. For different voltages and models for specific
countries, these values can vary.
Please observe the article number on the type plate
of your machine. The trade names of the individual
machines may vary.

Noise/Vibration Information

The measured values of the machine are listed in the
table on page 68.
Noise and vibrational values (vector sum of three
directions) determined according to EN 60745.
Meaning