Artecristal AUSTRAL Manual De Instrucciones página 12

INSTALLATION OF THE TOILET
COVER INSTALLATION
1. Place the toilet in the final position of
your installation and mark the position of
the necessary installation holes on the
floor.
2. Measure the distance in the toilet and
arrange the supports at that distance
with the marks on the floor. After chec-
king that they are up to the mark, mark,
drill and fix the brackets of the kit using
the screws and the provided plugs.
3. With the kit provided for the adjust-
ment of the cover, insert the nylon screw
as indicated in the photo.
4. Fit the piece in the rails of the lid.
5. Adjust the rails and insert through the
holes in the seat. Fix them with the nuts
provided in the kit.
2.
3.
4.
5.