Artecristal AUSTRAL Manual De Instrucciones página 15

No partial flush
No flush or flush less after push down
the button
Note: It is normal that water flows from the inside of the toilet in a moment after the flush.
Attention: Reduce the siphon to adapt it to the overflow level.
Defects caused by incorrect handling are not covered by the warranty.
Paper, plastic and other materials should be separated into the appropriate contai-
It is recommended that the installation be carried out by an authorized installer.
Disconnect the water connection before being manipulated and make the product
FAULT AND RESOLVENT
EXCLUSIONS OF THE WARRANTY
ENVIRONMENTAL CARE
ners when throwing away the packaging.
Attention!
change only then.
Check the fill water level whether is hi-
gher than the partial float. If not, adjust
the water level higher or adjust the float
lower.
1. Check the button whether is pushed
to the proper position.
2. Check the button rod whether is too
short. If yes, adjust the adjustment
rod's length.
ENG