Getting Started; Filling The Water Reservoir - Transcend Heated Humidifier Guía Rápida

GETTING STARTED

Important: It is important to place the Humidifier on a firm, level surface near your bed. It
is recommended that you not place the Humidifier on a surface that could be damaged by
water. The Humidifier should be on a level that is lower than your sleeping position to help
prevent condensation in the mask.

FILLING THE WATER RESERVOIR

1. Remove the Water Reservoir from the
Humidifier by pulling outward (Image 1).
2. Remove the Fill Cap (Image 2) and
carefully fill the Water Reservoir to the
MAX fill line with clean, fresh water.
Distilled water is recommended (Image 3).
3. Replace the Fill Cap and carefully return
the Water Reservoir to the Humidifier body
(Image 4).
STARTING AND ENDING THERAPY
1. Attach the air supply tubing (hose) to the
Humidifier. Be sure your mask is securely
attached to the opposite end of the air
supply tubing (Image 5).
Note: If the Transcend Universal Hose Adaptor
is attached to your air supply tube,
remove the Universal Hose Adaptor
before attaching the tube to the
Humidifier.
TRANSCEND HEATED HUMIDIFIER QUICK GUIDE
1
2
3
4
5
• ENGLISH • PAGE 4