Publicidad
Idiomas disponibles
Idiomas disponibles
Operating Instructions
Select switch position I, II or III for the required airflow and temperature output.
For positions II and III the temperature can be set by rotating the Temperature Setting
Ring (1)
With "L" in the vertical position adjacent to the "Arrow Head" the output temperature will be
at its lowest ie. 60 degrees "C"
Rotate the Temperature Setting Ring (1) in a clockwise direction to increase the
temperature.
Maximum temperature of 600 degrees "C" is achieved by fully rotating the Temperature
Setting Ring in a clockwise direction until "H" is adjacent to the "Arrow Head"
To turn the Heat Gun off it is recommended that it should be set to switch position I if it has
been used in switch position II or III at the higher operating temperatures. This allows the
element to cool prior to the final switching off and will prolong the life of the heating element.
To allow the Heat Gun to cool correctly, place in its free-standing vertical position on a flat,
non-slip, stable surface away from children and people who may be unaware it could be hot
Code
137-200
Variable Heat Gun
137-216
Variable Heat Gun
137-187
Variable Heat Gun
Code
Airflow
L/min
137-200
300-550
137-216
300-550
137-187
300-550
06/05/2009 Version No. 1
Description
Power
W
2000
1500
2000
Variable Heat Guns / UK
Voltage
Hz
240 V
50
110 V
50
230 V
50
Plug
BS 1363/A - 3 plug 13 A -250 V
EN 60309-3 plug 16 A–4 h 100–130 V
Schuko - 2 plug 16A - 250 V
Temperature
Range
60-600
60-600
60-600
Weight
750g
750g
750g
5
Publicidad
