Operation Instructions - Smartpond 52282 Manual Del Usuario

OPERATION INSTRUCTIONS

Step 1. Place your
pump inside the
filter box close to
the center with the
pump outlet facing
up. Route the pump
power cord through
the grove on the back
corner of the filter
box.
Step 2. Place bio-
balls around the
pump.
Step 3. Connect the
extension tube to the
outlet of the pump
using the supplied
adapters.
Step 4. Tighten the
locking nut for a
secure fit.
Step 5. Place the
fine filter pad (blue)
over the bio-balls
and pump and add
the course filter pad
(black) on top.
Step 6. Place the lid
over the box. It should
snap closed.
4 VISIT WWW.SMART-POND.COM FOR PRODUCT INFORMATION AND TIPS.
1
3
2
4
5
6