Pump Performance; Maintenance - Smartpond 52282 Manual Del Usuario

Step 12. Connect the
fountain nozzle to the top
of the extension tube.
Step 13. Place the
assembled filter kit in
water.
Step 14. Utilize the
pivoting base to achieve
a more vertical fountain
display if needed.
Step 15. Connect the
pump into a properly
grounded electrical
outlet.
NOTE: If the diverter
valve was used, you can
adjust the flow control as
needed.

PUMP PERFORMANCE

MAINTENANCE

• Occasional cleaning of the filter pads will be necessary to
ensure the proper functioning of the filter. The coarse filter pad
is a designed to trap large debris. The fine filter pad catches
smaller particles. All pads should be removed and washed with
clean water when they are visibly soiled - for best results, clean
the filter pads weekly.
• Before cleaning, always disconnect the pump from the power
source.
6 VISIT WWW.SMART-POND.COM FOR PRODUCT INFORMATION AND TIPS.
Pump Specifications
Max Flow Rate
275-GPH at 1-ft height
Power Consumption
23-watts / 0.4-amps
13
12
14
15