Important Safety Instructions - Medion AKOYA P53002 Manual De Instrucciones

Important Safety Instructions

Note
Read the detailed instructions on the digital media, which accompany the equipment.
Purpose of use
• This device is only suitable for use in dry, interior rooms.
• This device is only intended for private use. The device is not intended for operation in a heavily industrial company.
Use of the device under extreme environmental condition can result in damage to it.
Operating Safety
• Do not allow children to play unattended with electrical equipment. Children may not always correctly recognize danger.
• Never open the housing of the TFT monitor! When the housing is open there is a danger of injury from electric shock!
• Do not insert any objects through the slots and openings of the monitor. This may lead to an electrical short-circuit or even
fire resulting in damage to your TFT monitor.
• Slots and openings in the TFT monitor are for ventilation purpose. Do not cover these openings, as this may lead to
overheating.
• Never exert pressure on the display. This could break the monitor.
• Warning! An injury hazard exists when the display breaks. Wear protective gloves to pack the broken parts and send
them into your service center for proper disposal. Then wash your hands with soap, because it is possible for chemicals to
escape.
• Do not touch the display with your fingers or with sharp objects to avoid damage.
• This monitor complies with the regulation ISO 13406-2 class II (Class of pixel failures).
Point of use
• In the first hours of operation, new devices may emit a typical, unavoidable but completely harmless smell, which will decline
increasingly in the course of time.
We recommend you to ventilate the room regularly, in order to counteract the formation of the smell. During the
development of this product, we have made sure that the applicable limits are clearly fallen below.
• Keep your TFT monitor and all units connected to it away from moisture and avoid dust, heat and direct sunlight. Failure to
observe these instructions can lead to malfunctions or damage to the TFT monitor.
• Do not operate your device in the open air, because external influences, such as rain, snow, etc. could damage the device.
• Do not place any containers filled with liquid (vases or similar containers) on the device. The container could tip over
and liquid can impair electrical safety.
• Do not place any open sources of fire (candles or similar objects) on the device.
• Pay attention to sufficiently large clearances in the wall cupboard. Maintain a minimum clearance of 10 cm around
the device for sufficient ventilation.
• Place and operate all units on a stable, level and vibration-free surface in order to avoid the TFT monitor from falling.
• Avoid dazzle, reflections, extreme light/dark contrast in order to save your eyes and
ensure a pleasant, ergonometric work station.
• Take regulator breaks when working with your TFT monitor in order to avoid tension and
fatigue.
Intended Environment
• The TFT monitor can be operated at an ambient temperatures of between +41°F and +95°F
(5° C to 35° C) and at a relative humidity of < 80% (without condensation).
• When switched off, the monitor can be stored at between -4°F and +140°F (-20° C - +60° C), up to the maximum height of
39,000 ft (12,000 m) above sea level at a relative humidity of < 95% (without condensation).
• After transporting your TFT monitor please wait until it has assumed the ambient temperature before connecting and
switching it on. Extremely high variations in the temperature or humidity may result in condensation forming on the inside
of the TFT monitor which could cause an electrical short-circuit.
English
EN
DE
NL
FR
DK
ES
IT
PT
SE
NO
FI
1