Personal Safety; Before Use - Mellerware ELEGANT BREEZE Manual Del Usuario

tangled cables increase the risk of electric shock.
2.1.21. The appliance is not suitable for outdoor use.
2.1.22. Power cord should be regularly examined for
signs of damage, and if the cord is damaged, the appli-
ance must not be used.
2.1.23. Do not touch the plug with wet hands.

2.2. Personal safety:

2.2.1. CAUTION: Do not leave the appliance unattended
during use as there is a risk of an accident.
2.2.2. Do not touch the rotating parts of the appliance,
as it may cause serious injury.
2.2.3. This appliance is only for domestic use, not for
industrial or professional use. It is not intended to be
used by guests in hospitality environments such as
bed and breakfast, hotels, motels, and other types of
residential environments, even in farm houses, areas
environments.
2.2.4. This appliance is not intended for use by
persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervi-
sion or instruction concerning use of the appliance by
a person responsible for their safety.
2.2.5. This appliance is not a toy. Children should be
supervised to ensure that they do not play with the
appliance.
2.3. Use and care:
2.3.1. Fully unroll the appliance's power cable before
each use.
2.3.2. Do not use the appliance if the parts or acces-
2.3.3. Do not turn the appliance over while it is in use
or connected to the mains power supply.
2.3.4. Unplug the appliance from the mains power
supply when not in use and before undertaking any
cleaning task.
2.3.5. This appliance should be stored out of reach
of children.
2.3.6. Do not store the appliance if it is still hot.
2.3.7. Never leave the appliance unattended when in
use and keep out of the reach of children.
2.3.8. If for some reason, the appliance were to catch
supply and DO NOT USE WATER TO PUT THE FIRE
OUT.
2.4. Service:
2.4.1. Make sure that the appliance is serviced only
spare parts or accessories are used to replace existing
parts/accessories.
2.4.2. If the power cord is damaged, the manufacturer
replace it in order to avoid a hazard.
2.4.3. Any misuse or failure to follow the instructions
for use renders the guarantee and the manufacturer's
liability null and void.
3. Instructions for use

3.1. Before use:

plicable).
in the manner described in the cleaning section.
3.2. Assembly:
3.2.1. Fit the adjustable column (S) into the hole in the
base support (B), place the counterweight base (G)
underneath the support base (B) and secure with the
"L" shaped screw (I) inserting the washer (H) between
the base and "L" shaped screw (I) (Fig.1)
3.2.2. Fix the motor (A) to the adjustable column (S)
motor body screw fastening (K) and the motor body
fastening lever (L) making it coincide with the appropri-
ate holes. Next introduce the incline adjustment screw
(M) into the appropriate hole and tighten it with the
inline adjustment lever (N).
3.2.3. Unscrew the 4 screws and remove the washers
situated further back from the front part of the motor
body (A). Using these 4 screws, attach the rear grille
(Q), ensuring that the carrying handle (E) is on the up-
per part of the appliance.
3.2.4. Insert the fan propeller (D) onto the motor shaft
(R) until the hole in the fan propeller coincides with
motor shaft groove. Next use the fan propeller tighten-
ing screw to tighten it completely.
3.2.5. Position the front grille (P) on to the back grille
(Q), press them together ensuring that the clips are in
alignment. Make sure that the hole in the front grille
coincides with the security screw (O).
-