allen+roth 2048FM-28-247 Manual De Instrucciones página 8

ASSEMBLY INSTRUCTIONS (CONT'D)
This electric fireplace insert includes two
choices for the ember bed material. Either
white rocks (M) or acrylic glass (N).
3. Unscrew two thumb screws from each side,
located behind the side flanges. Save these as
they will be re-installed later on in the assembly
process.
Caution: Do Not let front face panel fall
forward once the screws are removed. This
could break the glass or lead to damage or
injury.
4. Unplug the wires that connect the touch screen
controls. Gently lean the top of the face panel
away from the body. Make sure to support the
face panel so it does not drop forward. Unplug
the wire bundle from the face frame. Set the
face frame aside as it will be re-installed later
on in the assembly process.
Note:Lay it on a blanket or soft surface to
prevent damage.
3
4
8
C