allen+roth 2048FM-28-247 Manual De Instrucciones página 9

ASSEMBLY INSTRUCTIONS (CONT'D)
5. Spread your choice of white rocks (M) or acrylic
glass (N) onto the emberbed area.
Re-install the face frame by aligning the front
frame with the body, and plugging in the wire
bundle to the control panel. Re-attach with the
four thumb screws into the side panels.
6. To assemble black metal foot (B), lay cabinet
(A) down onto a scratch-free surface, align the
holes on the black metal foot (B) with the
corresponding holes of the cabinet (A). Using
an Allen wrench, secure with three washers,
lock washers, and bolts.
Repeat for the remaining black metal foot (B),
Once complete, lift the cabinet back up to the
upright position.
Hardware used
Bolt
AA
Lock washer
BB
Washer
CC
Allen wrench
DD
5
6
x 6
x 6
x 6
x 1
9
N. Acrylic glass
M. White rocks
A
B
CC
AA
BB
DD