Descargar Imprimir esta página

Jeep RENEGADE Manual De Instrucciones página 19

Ocultar thumbs Ver también para RENEGADE:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 26
TRIP DATA STORAGE
AND TRANSFER
The trip data can be stored in the
system memory and transferred
through a properly configured USB
memory stick or the Uconnect™
LIVE App.
This allows you to display the history of
the collected data, showing the
complete analysis of the trip data and
of your driving style.
For further information visit the
www.driveuconnect.eu website.
IMPORTANT Do not remove the USB
memory stick nor unpair the
smartphone from the Uconnect™
LIVE App and before the system
has downloaded the data, since these
could be lost. During the transfer
of data to the devices, messages may
appear on the Uconnect™ display to
guide the user correctly through the
operation; follow these instructions.
These messages are only displayed
with the ignition device at STOP
and when a delay in the Uconnect™
system switching off is set.
The data are automatically transferred
to the devices when the engine is
switched off. Transferred data will be
deleted from the system memory in
this manner.
You can choose to store the trip data
or not, by pressing the "Settings"
button and by setting the storage
activation and transfer mode (USB or
Cloud) as required.
REMARKS
When the USB memory stick is full, the
dedicated messages are shown on the
Uconnect™ display.
When the eco:Drive™ data are
not transferred to USB memory stick
for a long time, the internal memory of
the Uconnect™ system may be
exhausted. Follow the instructions
given by the messages on the radio
display.
my:Car
my:Car allows you to keep the
condition of your vehicle always under
control.
The my:Car application can detect
faults in real time and inform the driver
on impending service deadlines.
To interact with the application,
press the "my:Car" button: a page
(fig. 5) will appear on the display.
The "care:Index" section contains
detailed information on vehicle status.
5
Press the "Active Warnings" button to
show the details of any vehicle faults which
caused a warning light to switch on.
The vehicle status can be see both on
www.driveuconnect.eu or through the
App Uconnect™ LIVE.
19

Publicidad

loading