Dell H955N Inicio De Su Sistema página 21

Starting the UPS
1
Verify that all load segment circuit breakers are in the ON position.
2
Switch the main utility breaker on.
3
Press the button on the UPS front panel.
Completing the Startup
1
Verify that the Normal icon
UPS is operating normally and any loads are powered.
2 On the UPS status summary screen, press the
Resolve any active alarms before continuing. See "Troubleshooting" in the Dell Network
Management Card User's Guide.
If there are no active alarms, a "No Active Alarms" message appears.
3
To change other factory-set defaults, see "Operation" in the Dell Network Management Card User's
Guide.
appears on the UPS status summary screen, indicating that the
button to check for active alarms or notices.
Installation and Startup
|
19