Trix Bad. IVh Serie Manual De Instrucciones página 15

CV Discription
1 * 7-bit Adress
2 Minimum speed
3 Acceleration delay
4 Braking delay
5 * Maximum speed
8 Factory Reset / Manufacturer Recognition
17 Extended address (upper part)
18 Extended address (lower part)
29 bit 0: Travel direction polarity reversal
bit 1: number of speed levels 14 or 28/128
bit 2: DCC Operation with braking Block.
DCC-, Selectrix- and DC power Operation
bit 5: Adress size 7 bit / 14 bit
51 * bit 0: Motor polarity reversal
bit 1: Headlight polarity reversal
bit 2: Track polarity reversal
— Stopping Block
— Pulse width for motor control
— ABV (Acce) effectiveness
— Control variations
Important: Changes in the settings market with ( * ) for the Selectrix mode
of operation automatically lead to changes in the DCC mode of operation
and versa!
DCC Value
Value
1 - 127
1 - 15
0 - 255
0 - 255
1 - 255
8
CV 29, bit 5 =1
CV 29, bit 5 =1
0 / 1 ***
0 / 2 0, 1, 2, 3, 4, 5, 6, 7,
0 / 4 32, 34, 35, 36, 37,
38, 39
0 / 32
0 / 1 ***
0 / 2 0 - 7
0 / 4
—
—
—
—
** Higher values do not lead to a further increase in speed.
*** The values for the desired settings must be added.
Factory-Set SX1 Value
DCC / SX1
3 / 1 0 - 111
10 / — —
5 / 2 1 - 7
3 / 2
130 / 5 ** 1 - 7
131 / — —
255 / — —
255 / — —
6 / — —
0 / 4 0 - 7
— / 1 1 oder 2
— / 2 1 - 4
— / 1 1 - 2
— / 3 1 - 4
15