Safety Notes; Important Notes; Functions - Trix 94.5 Serie Manual De Instrucciones

Safety Notes

• This locomotive is to be used only with an operating
system designed for it.
• Analog nax. 15 volts DC, digital max. 22 volts AC.
• Use only switched mode power supply units and transfor-
mers that are designed for your local power system.
• This locomotive must not be supplied with power from
more than one power pack.
• Pay close attention to the safety notes in the instructions
for your operating system.
• Do not expose the model to direct sunlight, extreme
changes in temperature, or high humidity.
• The feeder track must be equipped to prevent inter-
ference with radio and television reception, when the
locomotive is to be run in conventional operation. The
611 655 interference suppression set is to be used for this
purpose. The interference suppression set is not suitable
for digital operation.
• WARNING! Sharp edges and points required for operation.

Important Notes

• The operating instructions and the packaging are a com-
ponent part of the product and must therefore be kept as
well as transferred along with the product to others.
• Please see your authorized Trix dealer for repairs or
spare parts.
• The warranty card included with this product specifies
the warranty conditions.
• http://www.maerklin.com/en/imprint.html

Functions

• This model is designed for operation with H0 2-rail
DC systems (track according to NEM standards) with
conventional DC power packs.
• This locomotive comes equipped with a Trix
connector for digital operation and can have
the Märklin locomotive decoder 60942/60945
installed in it.
• Trix motor vehicles must not be operated on digital
systems without an built-in engine decoder (Motor can
be damaged!).
• Minimum radius for operation is 360 mm / 14-3/16"
• A 72270 (Märklin) smoke generator can be retrofitted to
the locomotive - also for analog operation.
7