Safety Notes; Important Notes; Functions - Trix 22266 Manual Del Usuario

Safety Notes

• This locomotive is only to be used with the operating
system it is designed for.
• Analog max. 15 Volts DC, digital max. 22 volts AC.
• This locomotive must not be supplied with power from
more than one power pack.
• Please make note of the safety notes in the instructions for
your operating system.
• The feeder track must be equipped to prevent interference
with radio and television reception, when the locomotive
is to be run in conventional operation. The 611 655 inter-
ference suppression set is to be used for this purpose.
The interference suppression set is not suitable for digital
operation.
• WARNING! Sharp edges and points required for operation.
• Do not expose the model to direct sunlight, extreme
changes in temperature, or high humidity.

Important Notes

• The operating instructions and the packaging are a com-
ponent part of the product and must therefore be kept as
well as transferred along with the product to others.
• Please see your authorized Trix dealer for repairs or spare
parts.
• http://www.maerklin.com/en/imprint.html
• The warranty card included with this product specifies the
warranty conditions.
All manuals and user guides at all-guides.com

Functions

• This model is designed for operation with H0 2-rail
• This locomotive comes equipped with a Trix connector
• Trix motor vehicles must not be operated on digital
• Minimum radius for operation is 360 mm / 14-3/16".
DC systems (track according to NEM standards) with
conventional DC power packs.
for digital operation and can have the Märklin locomotive
decoder 60942/60947 installed in it.
systems without an built-in engine decoder (Motor can be
damaged!).
7