Festool Heavy-Duty Manual De Uso página 9

Special processing information
Cold application with Festool oil dispenser SURFIX
or an alternative applicator for room temperatures
above 15 °C.
After approx. 15 minutes' soak-in time grind in with
green Festool non-woven cloth and remove excess
using a lint-free towel/cloth.
Depending on the request for intermediate sanding
(e.g. 240 grit size) apply additional oil and polish
with white Festool non-woven cloth.
Area of application
The product is a high-quality oleo-resin treatment
for all woods in outdoor areas, e.g. teak and garden
furniture, pergola, wooden terraces, fences, chil-
dren's toys, etc. Very suitable also for tropical
woods, e.g. bangkirai. High-quality plant oils im-
pregnate new wood and have a freshening-up effect.
UV-protected and film protection against fungal in-
fection.
Properties
Quick and simple processing. The natural oils pen-
etrate deep into the wood. They keep it healthy and
do not let it dry out. Good refreshment also for wood
that has already been painted. No light sanding re-
quired for recoating. No offensive smells. Sweat-
and saliva-proof i.a.w. DIN 53160.
Outdoor
Contents
Linseed oil, ricin oil/wood oil/stand oil, wood oil/
stand oil, mineral pigments, uv titanium, iodine pro-
pynyl butyl carbamate, Co/Zr/Zn/Mn drying agents.
VOC Directive (2004/42/EC): The VOC content of
this product is max. 1 g/l. The EU limit is max. 700 g/
l (Category "f" from 2010).
Special processing information
Distribute thinly and evenly using the Festool oil dis-
penser SURFIX or an alternative applicator. Do not
use at temperatures below 10° C and in direct sun-
light. Avoid puddle formation and wipe away any ex-
cess.
Depending on the requirement without intermedi-
ate sanding further oil applications are possible.
Additional information
Contains iodine propynyl butyl carbamate - may
trigger allergic reactions.
Baua Reg. No.: N-48038
Active substance: 0.6% (weight %) iodine propynyl
butyl carbamate
Product information on oils GB
9