Dismantling And Repairs; Eliminating Faults - Festo DG Serie Instrucciones De Utilizacion

DG..−...−GA, FDG−...−GA, DMES−...−GA
6 Care and maintenance
Lubricate the roller bearing cassettes of
S
the slide at intervals as specified in the
operating instructions for the linear axis.
Access to the lubricating nipple aA:
Remove the cover profile as described in
S
the chapter Fitting".
Clean the DG..−/FDG−/DMES−...−GA only
S
with water (max. 60 °C).
7

Dismantling and repairs

Replacing heavily worn parts:
Order a wearing parts kit for the protected guide.
S
8

Eliminating faults

Fault
Brushes visibly worn
Sliding elements worn
Grinding noises
Festo DG..−...−GA, FDG−...−GA, DMES−...−GA 0503a English
Fig. 10
Cause
Long operating period Lon operatin period
Cover profile deformed
Remedy
Order a wearing parts kit Order a wearin parts kit
Replace cover profile
aA
13