Metra 95-7017B Instrucciones De Instalación página 4

7. Remove (4) Phillips screws and
(8) 10mm bolts to remove the
sub-dash bracket (this bracket
will come out of the dash in four
pieces). (Figures H and I).
Tip: With the knee bolster panel
and the glove box removed you
can gain access to the sub dash
brackets easier.
8. Remove (6) panel clips from the
factory radio panel and keep
for assembly.
9. Remove the (2) panel clips from
the pocket or cd changer trim
panel and keep for assembly.
Continue to kit assembly
Dash Disassembly
(Figure H)
95-7017B
4
(Figure I)