Technical Specifications - B&G IS-2502 Instalación

features
The h1000 is a fully functional unit which can be used either as a stand-alone device or integrated into an instrument
system.
trademark
All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means including
photocopying and recording, without the express written permission of B&G.
Information in this document is subject to change without notice. B&G reserves the right to change or improve its
products and to make changes in the content without obligation to notify any person or organisation of such changes.

technical specifications

Dimensions mm:
Power Supply:
Power Consumption:
Display:
Display Resolution:
Operating Temperature range:
Storage Temperature range:
Humidity:
Sealing:
Accessories:
110mm x 110mm x 40mm
12V dc nominal (10V to 16V) via FastNet
0.45W to 0.85W (dependent on lighting level)
FSTN Dot-Matrix Transflective LCD
120 x 80 pixels
-10 to +55ºC (+14 to +130ºF)
-25 to +70ºC (+13 to +158ºF)
Up to 95% RH
IP67 (with dust caps fitted)
Flush mounting kit, mounting template,
power supply, I/O cable and protective cover
2