System Connections - B&G IS-2502 Instalación

system connections

connections
Bus cable
2
System components share data together via a common Fastnet databus
and are supplied with bayonet connectors for ease of installation. A
selection of cable lengths are available with options for straight and right
angle connectors to suit most requirements.
Bus cable Bus cable
"HUB"
To prevent the occurrence of voltage drops on larger systems, the power
supply to the system should either be placed mid-way or at both ends of
2
the Fastnet databus. To connect power to the mid-point of the system, it
is recommended that the 4-Way Hub be used. The 4-Way Hub offers two
12V power cable
advantages. The first advantage is that it offers a convenient entry point
for power onto the system. The second advantage is that it conveniently
allows the system to be branched to reduce the overall length of the
2
system. The correct selection of Fastnet cable will negate the need for
any plugs to be removed from the system and ensure years of faultless
operation.