BALAY 3XD620H Instrucciones De Uso página 60

Preparing the appliance before use
Navigation
The control panel on your appliance has
been designed to make operation easier.
The following points need to be taken into
consideration.
The "up" and "down" keys are used to
move up and down the screen. The "+"
and "–" keys (right and left) are used to
move to the right and to the left in the
selection box. The box shows the option
selected for modification.
The following is an example of navigation:
Up and down keys
The "up" and "down" keys are used to
move up and down the screen.
"Down" key :
Starting from the screen shown in the first
figure (the selection box is situated on the
operation function option). If you press
key , the selection box moves down to
the "Temperature selection" option.
If you press key again, the selection
box moves down to the "Speed selection"
option.
Important!
The hose has only one assembly
position.
Make sure that the lever is secured by
safety tab A, Fig. 21. Only then is the
connection correct.
Make sure that the electrical
connection is covered by the cover
and secured with the relevant screw.
Fig. 19A.
Make sure that the water tube is fitted
properly to prevent water from
Fig. 24
dripping onto the support surface. To
do this, follow the indications shown
in Fig. 20 in reverse order.
Presionando nuevamente la tecla
rectángulo de selección se desplaza hacia
abajo a la función "Selección de
velocidad".
61
, el