Harbor Breeze Centreville 40117 Manual Del Usuario página 8

INITIAL INSTALLATION
4. Remove the motor screws (EE) from the motor (D)
and save for later use. If there are plastic motor
blocks installed, remove and discard them.
Hardware Used
EE
Motor Screw
5. Remove the bracket screws (HH) from underneath
the lower mounting bracket (K).
Hardware Used
HH
Bracket Screw
6. Place a tab on the lower mounting bracket (K) into
a slot in the upper mounting bracket (B). Then slide
the second lower mounting bracket (K) tab into the
second slot on the upper mounting bracket (B) until
all four holes are in alignment.
4
x 10
5
x 4
HH
6
8
K
Lowes.com/harborbreeze
D
EE
B
K