System Control; Main Menu Screen (Fig.1) - AEB ANT B-TWIG 8 MOBILE Manual De Uso

UNINSTALLING:
1. Push backwards element B to release it from the stand (Fig.4)
2. Repeat the operation to release element A from the subwoofer (Fig.5)
Fig.4
B
B
A
Release B by pushing
towards arrow direction
A
B-TWIG 8 MOBILE
14 User manual |
Fig.5
A
Release A by pushing
towards arrow direction
A

5 | SYSTEM CONTROL

The B-TWIG 8 MOBILE system is incredibly simple to quickly set up.
An advanced graphic interface allows you to enter directly into the heart of the
system allowing you to configure each parameter, change presets, save or recall
scenes, adjust the volume, set the equalization and create a mix for different uses
to MIX OUT output. All setup operations are made easy by the use of a rotary
encoder equipped with a confirmation button, making configuration of the entire
system extremely fast and simple.

5.1 | MAIN MENU SCREEN (Fig.1)

When the system is turned on, the first screen shows the three-channel mixer with
its levels, status indicator (SIG/CLIP) and signal type (LINE/HI-Z/MIC), the channel
dedicated to the Main output, with its own level and signal indicator, the icons for
activating the Bluetooth - APP - Audio Streaming connection, and, finally, the
®
Bluetooth CONFIG and ABOUT menus.
®
You can highlight the icon, menu or desired parameter by simply turning the
appropriate rotary knob to the right or to the left and press to select the desired
function.
The arrow indicators aside of CH1-CH2-CH3 graphically represent the position
and level of the analog knobs on the unit.
The - - , icons, if activated, change the color status to green (Fig.2),
APP
in detail:
: The system is synchronized via Bluetooth
: The system can be fully controlled by "ANT SPEAKER CONTROLLER" app
APP
: Audio Streaming from the mobile device is activated and working.
CONFIG ABOUT
APP APP
LINE MIC /AUX -5 dB LINE MIC
CH1 CH2 CH3 MAIN CH1 CH2
Fig.1 Fig.2
with your Mobile device
®
CONFIG ABOUT
/AUX -5 dB
CH3 MAIN
B-TWIG 8 MOBILE
| User manual
15